https://guitarnoise.forum/guitar-repair-and-maintenance/reverend-guitar-w-bigsby-tuning-problems/ Guitar Noise Discussion Board en-US Fri, 05 Jun 2026 01:51:57 +0000 wpForo 60 https://guitarnoise.forum/guitar-repair-and-maintenance/reverend-guitar-w-bigsby-tuning-problems/#post-47576 Thu, 15 Mar 2018 02:13:57 +0000 The nut seems fine, have lubed it up anyway
Tuners seem fine
Truss rod/neck is adjusted properly, action is good
I put 11 gauge strings on the day I bought it, never had problems, never changed since
Rollers are working, lubed up to make sure they are rolling freely/enough
Have tried stretching out stock spring (Reverend has their own soft touch spring)
Rollers on roller bridge are working, have been lubed up
Locking tuners, I use as little wrapping around the post as possible, always have

I think that’s the whole list so far, luthier is out of ideas for what to try next. Only thing I can think of is to try a new spring? It goes sharp sometimes, sometimes it goes flat (all strings usually) mostly when using bigsby at all, but string bends cause issues too. Any ideas welcome, luthier says all things point to the fact that it should work. Any ideas or help appreciated.]]> Guitar Repair and Maintenance coreyle https://guitarnoise.forum/guitar-repair-and-maintenance/reverend-guitar-w-bigsby-tuning-problems/#post-47576