How tight is the lo...
 
Notifications
Clear all

How tight is the low e string meant to be?

19 Posts
9 Users
0 Reactions
9,118 Views
(@alangreen)
Illustrious Member
Joined: 24 years ago
Posts: 5342
 

The term E6 makes no sense to me, it's certainly not the notation GuitarPro uses.

With some of the chromatic tuners, there's a little bit in the display that says "6E" when you're playing the 6th string and it's close to tune, or "2B" for the second string etc.

How old is the battery in that tuner?

Best,

A :-)


"Be good at what you can do" - Fingerbanger"
I have always felt that it is better to do what is beautiful than what is 'right'" - Eliot Fisk
Wedding music and guitar lessons in Essex. Listen at: http://www.rollmopmusic.co.uk


   
ReplyQuote
(@slejhamer)
Famed Member
Joined: 22 years ago
Posts: 3221
 

As everybody else has missed it, the 6E string is not supposed to be at a higher pitch than the 4D string -
Modified Nashville tuning ... :wink:

Alan is correct - something is amiss, likely with the tuner. It should not be registering 5A (open 5th string), then 7b (open baritone 7th string) as you tighten up. If 5A is in fact your starting point, you have already tuned it too high.


"Everybody got to elevate from the norm."


   
ReplyQuote
(@jfk255)
Active Member
Joined: 20 years ago
Posts: 8
Topic starter  

hi
have just put new batteries in the korg tuner, but same result



   
ReplyQuote
(@demoetc)
Noble Member
Joined: 24 years ago
Posts: 2167
 

Hopefully it's not a baritone guitar, but I know you know the difference :)

One thing: sometimes electronic tuners, depending on the guitar and/or pickups, track the fifth or fourth instead of the fundamental. My little Korg CA30 does that. Really annoying. It'll say "Yes, your B is in tune!" when in fact I'm plucking my open E string.



   
ReplyQuote
Page 2 / 2